光纤液位传感器检测原理探讨

叙述光纤液位传感器在贮油罐中的应用,提出实验所采用的方案。推导出液面高度公式,比较实现检测的两种电路的优缺点,同时对实验精度和测量范围进行了讨论。     

热辐射驱动烧蚀平面金靶的数值定标定律

利用一维辐射流体力学编码数值研究了辐射烧蚀波在平面金靶中的传播情况,并在常温边界条件下得到了辐射流、烧蚀压、质量烧蚀率和特征等离子体密度的定标定律。     

On Two Parallel Matched Gratings Demodulation Method of Fiber Grating Strain Sensor

The method of demodulation with two parallel matched fiber Bragg gratings( FBGs)system is introduced to enlarge the range of strain that can be detected by the FBG sensor system.     

求解无线传感器网络路由问题的蚁群最优化算法及其收敛性

首先将无线传感器网络的路由问题转化成求解最小Steiner树问题,然后给出了求解无线传感器网络路由的蚁群优化算法,并对算法的收敛性进行了证明．最后对找到最优解后信息素值的变化进行了分析．即在限制信息素取值的条件下,当迭代次数充分大时,该算法能以任意接近于1的概率找到最优解,并且当最优解找到后,最优树边上的信息素单调增加,而最优解以外边上的信息素在有限步达到最小值．     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

现代热力学的完整分类系统--非平衡非耗散热力学新领域

在同一体系中同时有多个不可逆过程时，不可逆过程之间会有相互影响，原来的非自发过程有可能在其他自发过程的影响下得以进行，这种现象就称为热力学耦合或反应耦合，长期以来，经典热力学把热力学第二定律的等式作为平衡体系的充分必要条件，其中隐含了一个前提性的假定，即经典热力学的对象只限于非耦合的体系，摈弃这一隐含的前提性假定以后，热力学自身就发展成为一个现代热力学的完整学术体系，适用于任何宏观体系（包括极其复杂的生命体系），现代热力学的完整学术体系中包含了一个崭新的非平衡非耗散热力学新领域，由于该领域属于热力学第二定律的等式部分，因此可以定量计算，并得到一系列理论计算的非平衡相图，与文献上报道的激尖低压金刚石合成等的大量实验数据相符。     

小长径比垂直管气液两相流动特性分析

实验观察了小长径比垂直上流管内流型及特点,并对管入口处的压力波动特性和系统的压差波动特性进行了试验研究.结果表明:小长径比(L/D)垂直管内流型表现为泡状流、塞状流、乳沫状流、环状流和液束环状流;分别增加管线中的气量、液量,或者同时增加气液流量,均会造成垂直管入口处压力波动的均值和最大压力的增加;压力信号的概率密度(PDF)大部分呈双峰分布,也存在单峰和多峰分布;差压信号的概率密度符合正态分布,其功率谱密度同压力信号相比具有频率波动范围宽、幅值小的特点.     

Phosphonate electrochemical recognition by molecularly imprinted deposited film

In this paper, thin films of titanium oxide imprinted with O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrobenyl) methinephosphonate (Phi-NO₂) were prepared via liquid phase deposition (LPD) method on a glassy carbon electrode. The imprinted molecular in the films was removed by treatment with immersion in CH₂Cl₂. X-ray diffraction (XRD) and electrochemical methods were introduced to show the evidence of the molecular imprinting phenomenon. It was also found that the recognition ability of the sensor depended on the substituents associated with tridimensional structures of the nitro-compounds. Under the optimized condition, the sensor showed better sensitivity, selectivity and reproducibility to the imprinted molecule and the linear relationship between the current and the concentration of analyte in the range of 0.1-50 μM was obtained. LPD proved to be a powerful method for imprinting titanium oxide thin sense films.     

聚变等离子体中的快离子压强

本文运用Fokker-Planck方程的慢化近似,考虑存在多种离子成份(包括杂质),假定它们具有共同的温度,我们得到了聚变产生的快离子压强的简单封闭形式表示式。表明在典型的工作温度下(～60keV),D-~3He等离子体中聚变产生的快离子压强约为本底热压强的20％,这与D-T等离子体工作在20keV时的比值几乎相同。因此,D-~3He和D-T在它们相应的预期工作温度下,它们各自的快离子压强对总压强的影响是类似的,然而在更高的温度下,这个比值将变得更大。     

碳化硅压腔和高压下的中子衍射

使用宝石级碳化硅晶体作为压砧材料，成功研制出了碳化硅压腔（MAC），并应用全景式MAC进行了高压下物质的中子衍射实验研究。结果表明，MAC是一种既能产生高的压力又具有大的高压样品室的装置，特别适合于高压下的中子衍射研究。